SS102
SuperSteer

SuperSteer® SS102HT Heat Treated OE Replacement Rear Sway Bar for Ford F53 24-26k GVWR

SKU:
SS102HT
|
UPC:
758306324909
only $1,219.33
(No reviews yet) Write a Review
Weight:
92.00 LBS
Width:
21.00 (in)
Height:
7.00 (in)
Depth:
52.00 (in)
Current Stock:
Note: Must measure the distance of the bolts on the u-clamp of the OE rear sway bar.
Talk to an expert,
call 888.898.3281 Got questions?
Call 888.898.3281

Successfully added to your cart!

Checkout Now or View Cart

SS102HT SuperSteer® Heat treated OE Replacement Rear Sway Bar for Ford F53 V10, 2" Diameter

The SuperSteer® SS102HT rear sway bar is a factory replacement. At 2" diameter, it is larger than the V10 OE rear sway bar. The SS102HT is also heat treated, offering a stronger alternative to the traditional sway bar upgrade. When heat is applied during manufacturing, the steel hardens and becomes stronger. Traditionally, for every 1/8" sway bar diameter size, you gain 30% increase in strength. Heat treated sway bars provide approximately 60% increase for every 1/8". A huge improvement for such a small increase. The sway bar will help eliminate sway and body roll in your RV.

Our kits come with polyurethane bushings and all the hardware needed for installation.

Install Instructions

Download Installation Instructions

Not yet! We are continuously adding vidoes to our library, so please check back later.

Applications:

Ford F53 V10 Chassis with 24,000 lb GVWR (2009-2020), Ford F53 V10 Chassis with 26,000 lb GVWR (2009-2020)

Application Notes:

Please measure the center to center distance of the bolts on the u-clamp (the bracket that secures the bushing) of the OE rear sway bar. This must measure 5"-5.25" for this part to fit. See photo example below of where to measure:

 

Also, this part WILL NOT fit toy haulers (ie. Thor Outlaw) or models with additional bracing welded to the frame.

Shipping Weight Box Dimensions Approx Install Time

90 Lbs

52x21x8

2.5 Hrs

SS102HT SuperSteer® Heat treated OE Replacement Rear Sway Bar for Ford F53 V10, 2" Diameter

The SuperSteer® SS102HT rear sway bar is a factory replacement. At 2" diameter, it is larger than the V10 OE rear sway bar. The SS102HT is also heat treated, offering a stronger alternative to the traditional sway bar upgrade. When heat is applied during manufacturing, the steel hardens and becomes stronger. Traditionally, for every 1/8" sway bar diameter size, you gain 30% increase in strength. Heat treated sway bars provide approximately 60% increase for every 1/8". A huge improvement for such a small increase. The sway bar will help eliminate sway and body roll in your RV.

Our kits come with polyurethane bushings and all the hardware needed for installation.

Install Instructions

Download Installation Instructions

Not yet! We are continuously adding vidoes to our library, so please check back later.

Applications:

Ford F53 V10 Chassis with 24,000 lb GVWR (2009-2020), Ford F53 V10 Chassis with 26,000 lb GVWR (2009-2020)

Application Notes:

Please measure the center to center distance of the bolts on the u-clamp (the bracket that secures the bushing) of the OE rear sway bar. This must measure 5"-5.25" for this part to fit. See photo example below of where to measure:

 

Also, this part WILL NOT fit toy haulers (ie. Thor Outlaw) or models with additional bracing welded to the frame.

Shipping Weight Box Dimensions Approx Install Time

90 Lbs

52x21x8

2.5 Hrs

Need parts installed? Schedule an appointment at Henderson's Line Up or Find a Certified Dealer in your area.