SuperSteer

Sprinter Wheel Centering Tool WCT-001

SKU:
WCT-001
only $50.00
(No reviews yet) Write a Review
Weight:
1.25 LBS
Width:
6.00 (in)
Height:
4.00 (in)
Depth:
8.00 (in)
Current Stock:
Talk to an expert,
call 888.898.3281
Got questions?
Call 888.898.3281

Successfully added to your cart!

Checkout Now or View Cart

SuperSteer® Sprinter Wheel Centering Tool set WCT-001

The SuperSteer® Sprinter wheel centering tool is designed to correct off-center wheel/stud combinations that can cause wheel hop, vibrations, and premature tire wear. Because of the weight of the wheel/tire assembly, you may have an off center wheel due to hub pilot spacing. Due to the weight of the wheel, the upper and lower pilots allow some space between the wheel stud and the wheel. This can cause an "egg-shaped" motion to occur which could cause the above ride quality issues.

Designed for Sprinter chassis with 14mm wheel studs with factory captive flat washers.

Sold as a set of 3. Remove tool and reinstall factory lug nuts before driving. Torque to mfg. specifications.

Install Instructions:

This reusable tool is used at the 12, 8 and 4 o'clock positions when mounting the tires. Once the tire/wheel has been mounted with the tool, tighten lug nuts on the remaining studs to secure it in place. Remove the 3 tools from the 12, 8 and 4 o'clock positions and tighten the remaining 3 lug nuts where the tools were. Torque all nuts to mfg. specifications.

This product is not designed to be a permanent centering solution. Remove tool and reinstall factory lug nuts before driving. Torque to mfg. specifications.

Applications:

Dodge, Freightliner, and Mercedes-Benz Sprinter 2500 and 3500 chassis with 14mm studs.

Application Notes:

This is a reusable tool designed for centering purposes only. Remove tool and reinstall factory lug nuts before driving. Torque to mfg. specifications.

Shipping Weight Box Dimensions Approx Install Time

1.25 Lbs

8x6x4

.5 Hrs

SuperSteer® Sprinter Wheel Centering Tool set WCT-001

The SuperSteer® Sprinter wheel centering tool is designed to correct off-center wheel/stud combinations that can cause wheel hop, vibrations, and premature tire wear. Because of the weight of the wheel/tire assembly, you may have an off center wheel due to hub pilot spacing. Due to the weight of the wheel, the upper and lower pilots allow some space between the wheel stud and the wheel. This can cause an "egg-shaped" motion to occur which could cause the above ride quality issues.

Designed for Sprinter chassis with 14mm wheel studs with factory captive flat washers.

Sold as a set of 3. Remove tool and reinstall factory lug nuts before driving. Torque to mfg. specifications.

Install Instructions:

This reusable tool is used at the 12, 8 and 4 o'clock positions when mounting the tires. Once the tire/wheel has been mounted with the tool, tighten lug nuts on the remaining studs to secure it in place. Remove the 3 tools from the 12, 8 and 4 o'clock positions and tighten the remaining 3 lug nuts where the tools were. Torque all nuts to mfg. specifications.

This product is not designed to be a permanent centering solution. Remove tool and reinstall factory lug nuts before driving. Torque to mfg. specifications.

Applications:

Dodge, Freightliner, and Mercedes-Benz Sprinter 2500 and 3500 chassis with 14mm studs.

Application Notes:

This is a reusable tool designed for centering purposes only. Remove tool and reinstall factory lug nuts before driving. Torque to mfg. specifications.

Shipping Weight Box Dimensions Approx Install Time

1.25 Lbs

8x6x4

.5 Hrs

Need parts installed? Schedule an appointment at Henderson's Line Up or Find a Certified Dealer in your area.